Hangzhou NeoDen Technology Co.,Ltd.
21
Figure (2.2)
First, select one file, click ‘mount’. You will enter into the mounting page, shown as figure 2.2.
●
On the top-left corner shows process of mounting. You can track the process constantly by
the blue line.
On the top-right corner, there is a ‘log’ column, which shows the variation information of
mounting and issues feedback.
The placement speed can be manually changed by moving the speed button during mounting
(maximum 100%).
●
The six photographs show the pick alignment in real time. You can check every component
for each nozzle.
●
The function of five buttons on the right:
Continuous, the machine will executive the program automatically.
Step, the machine will executive one single step by click once.
Stop, the machine will stop the current process.
Configuration, the configuration interface will popup by clicking this button.
Figure (2.2-1)
Pick up position automatic optimization: Adjust the pick up position automatically
Summary of Contents for 7
Page 4: ......
