Hangzhou NeoDen Technology Co.,Ltd.
11
2.1.3 PCB fiducial setting
Figure (2.1.3)
Function: After finishing fiducial setting, when the machine is working, the specific position
and direction of PCB can confirm via setting fiducial. Only in this way the next step of
mounting work can carry out.
2.1.3.1 Single fiducial
It is mainly used for a single PCB board and multiple identical PCB boards consistent of the
whole board (Notice: coordinate programming is done as a single board)
Generally, need to select 2 or 3 fiducials.
2.1.3.2 Panelized fiducial
It is mainly used for multiple identical PCB boards consistent of the whole board, when place
every panel board, the machine will rescan small panel board’s fiducial.
2.1.3.3 Manual alignment
If there is no fiducial on the PCB, which can through some location holes and set up some
special reference point manually to replace and confirm reference position.
Summary of Contents for 7
Page 4: ......
