User Manual of E Series Network Speed Dome
45
5.2.4
Configuring Alarm Output
Steps:
1.
Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2.
Select one alarm output channel in the
Alarm Output
dropdown list.
3.
Set a name in
for the alarm output
(optional).
4.
The
Delay
time can be set to
5sec
,
10sec
,
30sec
,
1min
,
2min
,
5min, 10min
or
Manual
.
The
delay time refers to the time duration that the alarm output remains in effect after alarm
occurs.
5.
Click
tab to enter the arming schedule setting interface. The time
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to
Section
5.2.1 Configuring Motion Detection
.
Figure 5-18
Alarm Output Settings
6.
You can copy the settings to other alarm outputs.
7.
Click
to save the settings.
