User Manual of E Series Network Speed Dome
62
Configuration > PTZ > Smart Tracking
Figure 5-36
Configure Smart Tracking
2.
Check the
check box to enable smart tracking function.
3.
Click the PTZ buttons to select an object.
4.
Click
to set the current zoom ratio as the tracking zoom ratio.
5.
Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.
Setting the duration to 0 means that there’ no duration when speed dome tracks.
Not all the speed dome models support this function. Please take the browser interface of
the actual product as standard.
5.4.9
Prioritize PTZ
Steps:
1.
Enter the Prioritize PTZ interface:
Configuration
>
PTZ
>
Prioritize PTZ
.
Figure 5-37
Position Settings
2.
Select Network or RS-485 from the dropdown list
3.
Set the delay time (Range 2-200s).
4.
Click
to save the settings.
