User Manual of E Series Network Speed Dome
56
Zooming Speed
:
The speed of zooming is adjustable.
PTZ OSD:
Set the on-screen display duration of the PTZ status.
Zoom Status:
Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10
seconds, Always Close or Always Open.
PT Status:
Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, Always Close or Always Open.
Preset Status:
Set the preset name display duration while calling the preset as 2 seconds,
5 seconds, 10 seconds, Always Close or Always Open.
Power-off Memory:
The speed dome can resume its previous PTZ status or actions after it
restarted from a power-off. You can set the time point of which the speed dome resumes its
PTZ status. You can set it to resume the status of 30 seconds, 60 seconds, 300 seconds or 600
seconds before power-off.
3.
Click
to save the settings.
5.4.2
Configuring PTZ Limits
Purpose:
The speed dome can be programmed to move within the configurable PTZ limits (left/right,
up/down).
Steps:
1.
Enter the Limit configuration interface:
Configuration
>
PTZ
>
Limit
Figure 5-27
Configure the PTZ Limit
2.
Click the checkbox of
Enable Limit
and choose the limit type as manual stops or scan stops.
