User Manual of E Series Network Speed Dome
34
2.
Click
to enter the Capture Schedule interface.
3.
Select the timeline of a certain day, click and drag the left button of the mouse to set
the capture schedule (the start time and end time of the recording task).
4.
After you set the scheduled task, you can click
and copy the task to other days
(optional).
5.
After setting the capture schedule, you can click a capture segment to display the
segment capture settings interface to edit the segment capture parameters. (optional)
Figure 5-4
Segment Snapshot Settings
6.
Click
to enter the advanced setting interface. You can select the stream type
of the capture.
7.
Click
to enter the Capture Parameters Interface.
8.
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot, and
configure the schedule of timing snapshot. Check the
Enable Event-triggered Snapshot
checkbox to enable event-triggered snapshot.
9.
Select the format, resolution, quality of the snapshot.
10.
Set the time interval between two snapshots.
11.
Click
to save the settings.
Uploading to FTP
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings interface.
Please refer to
Section 6.1.2 Configuring FTP Settings
for more details to configure FTP
parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
3)
Click
Edit
to set the snapshot schedule. Refer to
Section 5.2.1 Configuring Motion
Detection
.
Upload event-triggered snapshots to FTP
