User Manual of E Series Network Speed Dome
67
Figure 6-7
PPPoE Settings
2.
Check the
Enable
PPPoE
checkbox to enable this feature.
3.
Enter
User Name
,
Password
, and
Confirm
password
for PPPoE access.
The User Name and Password should be assigned by your ISP.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
4.
Click
to save and exit the interface.
Configuring Port Settings
Purpose:
If there is a router and you want to access the speed dome through Wide Area Network (WAN),
you need to forward the 3 ports for the speed dome.
Steps:
1.
Enter
the Port settings interface:
Configuration > Network > Basic Settings > Port
Figure 6-8
Port Settings
2.
Set the
HTTP port, RTSP port and port of the speed dome.
HTTP Port
: The default port number is 80.
RTSP Port
: The default port number is 554.
HTTPS Port
: The default port number is 443.
