13
5-2 Mounting Illuminator on Frame
Since mounting methods vary by frame types, make sure of the type to be used and follow the
procedure as described below as well as referring to the instruction manual of the Binocular Loupe
used.
5-2-1 Mounting Illuminator on Titanium Frame
(1)
Remove the large screw and the washer that fix the Loupe to the Frame in the center
(shown in Fig. 5-2-1).
Note: The removed washer shall be reused when the Illuminator will be mounted onto the
Frame, do not throw away.
(2)
Affix the hinge on the Illuminator to both the Frame and Loupe together by using the Long
type screw provided with the Frame and the washer removed in the above step (1). In case
of using the Illuminator closer to the Loupe (underneath of the Loupe), tighten the screw
with the washer as shown in Fig. 5-2-2.
Fig. 5-2-2
Long type Screw
Washer
Large Screw
Large Screw
Washer
Fig. 5-2-1
