![background image](http://html1.mh-extra.com/html/neilsen/ct3795/ct3795_user-manual_3879191019.webp)
19
8.SAWING
Before proceeding to your job, read
“For Safe Operation” section.
It is recommended to first practice sawing easy logs. This also helps you get
accustomed to your unit.
Always follow the safety regulations. The chain saw must only be used for cutting
wood. It is forbidden to cut other types of material. Vibrations and kickback vary
with different materials and the requirements of the safety regulations would not be
respected.
Do not use the chain saw as a lever for lifting, moving or splitting objects.
Do not lock it over fixed stands. It is forbidden to hitch tools or applications to the
P.t.o. that are not specified by the manufacturer.
It is not necessary to force the saw into the cut.
Apply only pressure while running the engine at full throttle.
When the saw chain is caught in the cut, do not attempt to pull it out by force, but
use a wedge or a lever to open the way.
Use a spiked bumper when cutting trees and thick branches.
Run the engine on full throttle and be sure that the spiked bumper is engaged firmly
in to the wood before you start cutting.
Do not work without the spiked bumper being engaged as the saw may pull you
forwards and this is very dangerous.
The chain may pinch on the wood pulling the saw forward.
Always ensure that the spiked bumper is held securely against the tree or branch.
Only use the chain saw for cutting wood.
Do not try to cut any other materials this is highly dangerous.
GUARD AGAINST KICKBACK (F19)
This saw is equipped with a chain brake that will stop the
chain in the event of kickback if operated properly. You
must check the chain brake operation before each usage by
the saw at full the throttle for 1-2 seconds and pushing the
front hand guard forward. The chain should stop
immediately with the engine at full speed. If the chain is slow