![background image](http://html1.mh-extra.com/html/neilsen/ct3795/ct3795_user-manual_3879191021.webp)
21
working on a slope, stand on the uphill side of the log.
●
Follow the instructions in
“For safe Operation” to avoid
kickback of the saw.
Before starting work, check the direction of bending
force inside the log to be cut. Always finish cutting from
the opposite side of bending direction to prevent the guide bar
from being caught in the cut.
A Log lying on the ground (F21)
Saw down halfway, then roll the log over and cut from the
opposite side.
A Log hanging off the ground (F22)
In area A, saw up from the bottom one-third and finish by
sawing down from the top. In area B, saw down from the top
one-third and finish by sawing up from the bottom.
Cutting Limb of Fallen Tree (F23)
First check to which side the limb is bent. Make the initial cut
from the bent side and finish by sawing from the opposite side.
Be alert to the springing back of a cut limb.
Pruning of Standing Tree(F24)
Cut up from the bottom, finish down from the top.
●
Do not use an unstable foothold or ladder.
●
Do not overreach.
●
Do not cut above shoulder height.
●
Always use your both hands to grip the saw.
9. MAINTENANCE
Different maintenance items may need attention at different
times. Please see below regarding individual aspects.
Before cleaning, inspecting, or repairing your unit, make sure
that the engine has stopped and is cool. Disconnect the spark
plug to prevent accidental starting. Cover the guide bar with the
protector to the rear and the muffler and engine hot parts
Transportation by vehicle:
Always secure the saw to prevent it rolling over and causing fuel
spillage and damage to saw. When not in use store the saw in a
safe place.