12
4. INSTALLING GUIDE BAR AND SAW CHAIN
A standard saw unit package contains the items as the items as
illustrated. (F1)
(1)
Power unit
(2)
Bar protector
(3)
Guide bar
(4)
Chainsaw
(5)
Plug wrench
(6)
Screwdriver for carburetor adjustment
(7)
Spike and mounting screws
Open the box and install the guide bar and the saw chain on the
power unit as follows:
The saw chain has very sharp edges. Usethick protective gloves for safety.
1.
Pull the hand guard towards the front handle to disengage and to check that the chain
brake is not on.
2. Loosen the nuts to take off the chain sprocket cover.
3. Turn screws anti-clockwise til tensioner nut is resting against the end of the sprocket cover.
4. Note: chain pitch must match the pitch of the sprocket. (see specifications p.21 point 14)
5. Ensure bumper spike is installed and attached to the power unit, then fix the screw in
Accessories.
6. Guide chain to the sprocket and fit saw chain and guide bar.
Mount the guide bar to the power unit, turn the tensioning
screw clockwise until the chain is no longer sagging on the
underside of the bar, adjusting the position of chain tensioner
nut on the chain cover to the lower hole of guide bar.(F2)
7. Refit the chain sprocket cover.
(8) Hole
(9) Tensioner nut
(10) Chain cover