![background image](http://html1.mh-extra.com/html/neilsen/ct3795/ct3795_user-manual_3879191008.webp)
8
(1) Safety Helmet EN397
(2) Protective goggles or reinforced Face Protector EN166,EN1731
(3) Thick protective gloves with reinforced left hand EN381-7
(4) Leg protection, outer clothing high visibility and upper body
Protection EN381-5, EN381-11
(5) Chain saw boots BS EN ISO 20345:2004, EN 381-3, EN381-9
(6) Ear protectors: Sound power level: 111.2dB(A), EN352-1
Please wear ear protectors.
b. And you should carry with you.
1. First Aid kit
2. Attached tools and files.
3. Properly reserved fuel and chain oil.
4. Things to notify your working area (Rope, warning signs)
5. Whistle, mobile phone/ radio for emergency contact
6. Hatchet or saw (for removal of obstacles ie fallen branches
c. Never use the product wearing sandals/when barefoot and always wear anti-snag clothing
■
WARNING: HANDLING OF FUEL
a. The engine of this product is designed to run on a mixed fuel which
contains highly flammable gasoline. Never store cans of fuel or refill
the fuel tank in any place where there is a boiler stove, wood fire,
electrical sparks, welding sparks, or any other source of heat or fire
which might ignite the fuel.
b. Smoking while operating the product or refilling its fuel tank is
extremely dangerous. Always be sure to keep lit cigarettes away from
the product at all time.
c. When refilling the tank always turn off the engine first and take a careful
look around to make sure that there are no sparks or open flames
anywhere nearby before refueling.
d. If any fuel spillage occurs during refuelling, use a dry rag to wipe up
spills before turning the engine back on again.
e. After refuelling, screw the fuel cap back tightly onto the fuel tank and
then carry the product to a spot 3m or more away from where it was
refuelled before turning on the engine.
■
FUELLING INSTRUCTION:
Only fuel your chainsaw in a well ventilated area
f. Gasoline vapour is invisible and can travel, be careful if there are any spillages of fuel.
g. Gasoline vapour pressure may also build up in the fuel tank .Be very careful in hot weather.
h. Remember to take special care when removing filler caps.
Never remove them when the engine is running.
■
BEFORE STARTING ENGINE
Note: always check you know how to stop the chain saw.