![background image](http://html1.mh-extra.com/html/neilsen/ct3656/ct3656_original-instructions-manual_717783011.webp)
11
6. Malfunction analysis
If there is something you do not understand ,please contact the service center.
MALFUNCTION
CAUSE
RECTIFICATION
No charging indicator.
Not connect with power supply.
Plug into power supply.
Indicator damaged.
It is necessary to repair it if you could still charge the
clipper normally .If you really need to repair this
problem, please return to service center.
Low power (no use for long
time).
Please charge battery continuously for a few minutes,
and it shall work normally.
Charging circuit defect.
Back to service center.
Charging for too long
time.
Not use the original adaptor
attached.
Use the original adaptor for charging.
Reach the life time of battery.
Back to service center.
Charging circuit defect.
Back to service center.
Does not work when
you turn it on.
Low power level of the battery.
Charge battery with the adaptor and power cord.
Power switch damaged .
Back to service center.
Circuit defect.
Back to service center.
Noisy
Low lubrication of the cutting.
Charge battery with the adaptor and power cord.
Hair twisted on cutting head.
Clean the cutting head and clipper.
The clipper head is
too hot.
The pressure on the blades is
too high.
Reduce pressure on blades with the adjustment cap.
There is no lubricating oil on
blades.
Add lubricating oil.
There is no lubricating oil to be
added l at the driving wheel.
Add lubricating oil to the lubrication port on the clipper
head .
Cutting performance
is not good.
Clipper blades are rush out
Have upper and lower blade resharpened by the
service centre.
Clipper blades have not been
correctly contacted.
Clipper blades are not oiled.
Oil clipper blades every 15 minutes.
Clipping tension too low.
Add pressure by tightening the adjustment cap
(Figure 3).
T
he animal’s hair is wet.
Only clip when dry.
Other
Possible malfunction.
Have clipper checked by a qualifies repairer.