7
exceed 50°C.
7. Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn
out. The battery cartridge will explode in a fire.
8. Be careful not to drop, shake or strike battery.
9. Do not pack anything in a box or container. The battery should be placed in a well ventilated
area during charging.
4.Operation
4.1 Caution of operation
It is dangerous if the electrical equipment is used improperly, especially stockbreeding
equipment! So you should observe the following accident-prevention measures before using it:
The mains voltage must be the same as that shows on the nameplate. The charger must
be connected to The AC Supply.
Avoid to contact with the moving shearing blades.
Even if the machine is switched off, We do not handle at the area of the clipping blades
as long as the machine is connected to a battery cartridge. We should cut off the power supply
before changing to the shearing blades/shearing head.
Avoid to touch any machine which is contacted with any liquids. Never clip wet animals.
Any liquid which has got into the machine will lower the electrical insulation. The electric shock
or short circuit is dangerous. So we should clean the machine with the cleaning brush and dry
it.
An electric cable lays at the ground .It is easy to cause danger. Before charging, the cable
is laid out carefully and safely. We should avoid kinds of the power cable and prevent it
becoming entangled. We should prevent the animals standing on or walking across the power
cable in case of touch it. The power cable should not be wrapped around the machine and
keep it away from the hot surfaces and objects. Maybe it cause damages of the insulation. The
cable should keep regularly checked from that it is damaged.
Switch the machine to off (
Figure 1
) before replacing the battery cartridge.
Wear professional clothes. Do not wear any loose clothing or items of jewellery which
could get caught up in moving machine parts. We would recommend in the strongest terms that
protective goggles and ear protectors should be worn.
Do not insert any objects into the machine.
The Noise from the machine can impact on animals. The serious can cause a result of
being kicked by an animal or being crushed by its body weight .We should tether the animal
securely, approach it and switch the machine on within the animals’ range of vision.
Animals should be clipped if the unauthorized person have been excluded from the
clipping area.
Only clip in well-ventilated spaces (dust) and never clip near objects or gases.
Danger of blockage! The machine should not be operated unless the blades are fitted.
These safety notes must be complied in any cases .
