![background image](http://html1.mh-extra.com/html/neilsen/ct3656/ct3656_original-instructions-manual_717783005.webp)
5
3.1 Introduction
This section describes the mandatory safety regulations which must be carried out when we
use the clipping machine. All people should read the operating instructions before using the
product. The operating instructions must be kept safely in the storage case at all times.
3.2 Proper Use
Which the machine is used on is described in Section 2.
The security operation is as follows:
The details is at section 3 “Technical data” and is counted as mandatory operating limits and
ratings. Clipping other animals which is particular dangerous animals such as beasts of prey
and the like, counted as misusing. It maybe cause circumstances dangerous to humans. The
appliance is not intended for using by young children or infirm persons. If it is used ensure that
it not to be subjected to splashing or ingress of moisture.
3.3 Safety Principles
3.3.1 Power Connections
Only insert the plug into undamaged sockets. Defective installations can cause an electrical
shock or a short circuit. Outside sockets must be equipped with a fault current breaker.
Observe the relevant national regulations.
The leaning and servicing should only be done with the mains plug pulled out. Never let a
machine its cable plugged in if it laid around unsupervised .Keep children away from the
working area and store the machine out of their reach.
3.3.2 Servicing and Checking Requirement
Only operate the clipping machine if it is undamaged in a proper condition. Any defects to the
housing or the electrical cable should be rectified by a repair or service agent.
3.3.3 Noise emission/Personal Protective Equipment
3.3.3.1 Wear Ear Protectors
Typical sound emissions are loud when working . We recommend that ear protectors should
always be worn when it is working.
3.3.3.2 Wear Protective Goggles and Gloves
we recommend that you wear protective goggle and gloves when you want to clip something.
Personal protective equipment is to be provided by the operator.
3.3.4 Other Dangers
If a failure occurs during operation in general, not directly clipping animals any more, please
communicate with us.
3.4 Essential Operator Skills
The operation is not good enough to cause damage. So all we have to do is master the
necessary skills. However, it is essential that they are observed and carried out.
The operator must has been trained before operating the machine.
The operator must have read and understood the instructions or have been instructed by
an expert in the machine’s use and have had the potential dangers explained.