![background image](http://html1.mh-extra.com/html/neilsen/ct3656/ct3656_original-instructions-manual_717783010.webp)
10
5. Daily care and maintence
Disconnect the power supply before starting any servicing work . Remove the battery cartridge.
Do not handle the area round the clipper blades as long as the machine is still connected to a
power source even if the machine switched off . We always firstly disconnect the power supply
whenever working on the clipper blades or clipper head .
5.1 Cleaning
cleaning the clipper head and clipper blades
After clipping, remove all oil from the machine by rubbing it down with a dry cloth. Clean the
clipper head and clipper blades with a dry brush .Then oil the parts to prevent rusting, even if
there is a little rust spots on the blades
,
it can adversely affect clipping or making it completely
impossible.
5.2 Fitting the clipper blade
A pair of clipper blades consists of a lower blade
(Figure 6, part 16)
and an upper blade
(Figure
6, part 15)
.When the blades which is adjusted should be taken to ensure that the correct
surfaces come to rest each other. The blades are fitted as follows:
Loosen the adjustment cap and ensure that the new clipper blades are clean and the ground
surfaces are free of dirt. Then put on the blades and tighten the adjustment cap
(Figure 2 )
until
it can clip smoothly. If not
,
we only to change the blades.
After you adjust the blades smoothly ,we should place a few drops of oil on the ground surface
the blades and lubrication hole
(Figure3)
.
5.3 Resharpening the clipper blades
Only work with sharp clipping blades which clip horsehair smoothly. Replace blunt blades or
those with missing teeth. Do not personally resharpen the clipper blades. It can only be done
with a special machine and by someone who has been trained.
5.4 Storing the clipping machine
Lay the machine in a dry place .Do not switch the machine on if you suspect that some liquid
has got into it. There is a risk of an electric shock or short circuit. Please you hand the clipping
machine into a service centre. We should form a good habit to store the machine.