29
Assembly Instructions
For the installer
and kitchen expert!
Important installation
Properly dispose of
packaging materials.
notes
Do not use
oven door handle
for
transporting or handling the unit during
installation.
WARNING:
Connection and first start of the
appliance may only be performed by an
authorised specialist.
Connection have to be made using a mains
connection cable not lighter than H05RR-F
300 V / 500 V Rubber Flexible Cable or H05VV-F
300V / 500V PVC Flexible Cable.
Rated consumption, rated voltage and type
no. of the appliance:
See appliance nameplate behind the oven door
to the left beneath the side edge of the oven.
The unit's nameplate is located at on the
sidewall of the unit.
Electrical safety
of the appliance can be ensured
only if the equipment earth in the building
installation has been installed according to
regulations.
A separator must be installed in the household
circuit. A suitable separator is a switch that has a
The connection diagramm
is
contact gap of more than 3 mm and interrupts all
located on the rear panel of the
poles. Other examples are LS switches, fuses
appliance.
and contactors.
In the case of repairs
interrupt all power
connections to the unit.
The properly installed appliance must be covered
on all sides in such a fashion that not even
components with rough insulation are exposed to
the touch.
The cover must be removable with tools only.
220-240V
~
L
N
