27
Trouble-shooting Guide
Calling the customer service is not always really necessary. In some cases, you can
remedy the situation yourself. The following table may contain some helpful tips.
Important general safety guidelines:
Service or repair work on the electronic components may only be performed by a
qualified expert. Without exception, prior to starting such repairs, the appliance must
be disconnected from the mains. This may be accomplished by tripping the
automatic fuse or by removing the fuse from the fuse box that controls your flat or
apartment.
Problem
Possible cause
Remedy
. . . if there is a general failure of
Defective fuse
Check the fuse in the fuse box, and
all electrical functions, i.e., the
replace if required.
control lamps have suddenly
ceased to function.
. . . if liquids or thin viscous
The appliance has not
Level the appliance using the leveling
dough are distributed at a
been placed or installed
feet, or check the installation.
visibly uneven thickness?
plumb-and-level.
. . . if the oven suddenly stop
The electronic clock is
Set electronic clock to operation
functioning?
set to an automatic
without automatic timer:
timing cycle.
1.
Press the
:
button.
2.
Reset ON time
?
to
0
:
00
.
. . . if the oven suddenly stop
The power supply was
Reset the time of day.
functioning and the electronic
briefly interrupted.
clock flashes
0
:
00
?
. . . if electronically control
Energy pulses
Reset the relevant functions.
functions fail?
(e.g. lightning flash).
