Page 8 of 13
US version
Insert screws matching the back box into the two mounting holes. Secure the con-
trol system to the back box or bracket without overtightening the screws.
Mount the frame on the control system with the supplied screws.
Insert a flathead screwdriver gently and pry out the front cover. Remove the
front cover and the paper label behind it.
Remount the paper label, insert a printed transparent label showing the button
functions, and mount the front cover. Note that the front cover mounts in only
one
direction.
EU version
Insert a flathead screwdriver gently and pry out the front cover. Remove the
front cover and the paper label behind it.
Insert the control system in a frame matching the back box used.
Insert screws matching the back box or bracket into the two holes. Secure the
control system to the back box or bracket without overtightening the screws.
Remount the paper label, insert a printed transparent label showing the button func-
tions, and mount the front cover. Note that the front cover mounts in only one direction.
4.
Connect and apply power to the control system.
5.
Configure the control system using the Neets Project Designer.
Paper label
Transparent label
Front cover
BL
AN
K
PC
1
PC
2
HD
MI
2
HD
MI
1
VO
L+
VO
L-
Paper label
Transparent label
Front cover
