Nederman TAV 100, User Manual

Page: 13 / 110

TAV 100/150
13
EN
1 Preface
Read this manual carefully before installation, use and service of this product.
Replace the manual immediately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EC directives. To
maintain this status, all installation, maintenance and repair is to be done by
qualified personnel using only Nederman original spare parts and accessories.
Contact the nearest authorized distributor or Nederman for advice on
technical service and obtaining spare parts. If there are any damaged or
missing parts when the product is delivered, notify the carrier and the local
Nederman representative immediately.
2 Safety
This document contains important information that is presented either as a
warning, caution or note. See the following examples:
WARNING!
Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel,
and how that hazard may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE!
Notes contain other information that is important for personnel.
3 Technical data
Table 3-1: Dimensions
Item Dimension
Maximum pressure 1 MPa (10 bar)
Minimum pressure (for safe operation) 0,5 MPa (5 bar)
Recommended pressure 0,6 - 0,7 MPa (6 - 7 bar)
Air quality ISO 8573-1 class 5
Working temperature 0 – 40 ºC
Wiring gauge minimum 0,75 mm
2
Solenoid voltages 115 V AC (+10% -15%)
230 V AC (+10% -15%)
24 V DC (+ -10%) or
24 V AC/DC (not ATEX)
Frequency 50 / 60 Hz for AC
Equipment type II 3D c T=130 ºC
(ATEX-products)