NED XCM8085DLMT8, User Manual

Page: 39 / 89

39 NED
XCM8085DLMT8 UME-0060-04
>tap 8
NOTE: The value of output tap means the number of tap for each line.
When you use 2 displays (disp=1), the value of output tap is equal to half of the
number of Camera Link taps.
When you use 1 display (disp=0), the value of output tap is equal to the number of
Camera Link taps.
4.2.21 Temperature Display
Displays internal temperature of the camera.

Format 1 CMD

CMD temp
<Example>
Temp <CR>
>OK
> Camera Temp= 48.4 Celsius
>temp
4.2.22 Selecting Output Data Rate
Selects the output data rate at 85MHz or 40MHz by setting the camera link clock at
85 or 40.

書式
2 CMD
□
VAL1 CR

CMD clkcl

VAL1 85 : 85MHz
40 : 40MHz
(Example)
clkcl 40 CR
>OK
>clkcl 40
The exposure time value may change
automattically to become within a setable range
when the camera link clock changes.
For example, the exposure time value was set in
the minimum value at the output data rate of
85MHz before the camera link clock changes
from 85 to 40.
That value was not within a setable range at the
output data rate 40MHz. but the value changes
automattically.
Make sure that the desired value is set. (sta)