Necta KIKKO ES6, Installation, Use And Maintenance Manual

Page: 7 / 76

3
© by NECTA VENDING SOLUTIONS SpA 02-2004 184 02
POSITIONING THE VENDING MACHINE
The vending machine is not suitable for outdoor installa-
tion. It must be positioned in a dry room where the tempera-
ture remains between 2° C and 32° C, and not where water
jets are used for cleaning (e.g. in large kitchens, etc.).
The machine should be placed close to a wall, so that the
back panel is at a minimum distance of 4 cm from it and
correct ventilation may be ensured. The machine must
never be covered with cloth or the like.
The machine should be positioned with a maximum incli-
nation of 2°.
If necessary provide proper levelling by way of the adjust-
able feet included (see Fig. 12).
WARNING FOR INSTALLATION
The machine installation and the following mainte-
nance operations should be carried out by qualified
personnel only, who are trained in the correct use of
the machine according to the standards in force.
The machine is sold without payment system, therefore
the installer of such a system is responsible for any
damage to the machine or to things and persons caused
by faulty installation.
The integrity of the machine and compliance with the
standards of the relevant systems must be checked at
least once a year by qualified personnel.
All packing materials shall be disposed of in a manner
which is safe for the environment.
PRECAUTIONS IN USING THE MACHINE
The following precautions will assist in protecting the
environment:
- use biodegradable products only to clean the machine;
- adequately dispose of all containers of the products
used for loading and cleaning the machine;
- switch the machine off during periods of inactivity, thus
achieving considerable energy savings.
WARNING FOR SCRAPPING
Whenever the machine is to be scrapped, the laws in force
regarding environment protection should be strictly ob-
served. More specifically:
- ferrous and plastic materials and the like are to be
disposed of in authorized areas only;
- insulating materials should be recovered by qualified
companies;
TECHNICAL SPECIFICATIONS
Height 1700 mm
Height with top panel lifted 1985 mm
Width 540 mm
Depth 690 mm
Overall depth with door open 1120 mm
Weight 114 Kg
Fig. 2
Power supply voltage 230 V
~
Power supply frequency 50 Hz
Installed power 1800 W
CUP DISPENSER
Suitable for cups with a rim diameter of 70-71 mm with
a capacity of approximately 490 cups.
PAYMENT SYSTEM
The machine is supplied with all electrical prearrangement
for systems with Executive, BDV and MDB protocol, as
well as for installation of 24 V DC validators.
Beside the coin mechanism housing, suitable space is
provided for the installation (optional) of the most widely
used payment systems.