Necta KIKKO ES6, Installation, Use And Maintenance Manual

Page: 27 / 76

23
© by NECTA VENDING SOLUTIONS SpA 02-2004 184 02
WASH BUTTON
With this function it is possible to enable the operation of
the mixer wash button.
Normally the button is disabled.
AUTOMATIC WASH
It is possible to set the time when performing an automatic
wash of the mixers and a rotation of the brewer units
installed. When setting the time to 24.00 the function is
disabled.
(default).
DECAF CYCLE
When enabling this function, instant coffee powder (if
present) is dispensed in two steps to improve the appear-
ance of the drink.
PRE-GRINDING
This function is used to enable/disable grinding of the
coffee dose for the next selection.
This permits the reduction of dispensing time for a coffee
selection
. The function is disabled by default.
BREWING TIME
This function (enabled only in fresh tea models) permits
opening of the tea dispensing solenoid valve for a length of
time, set in tenths of a second, and delivering of a small
amount of water onto the product in order to dampen it
before the actual brewing cycle.
DISPLAY
LANGUAGE
There is a choice of language, selected among the ones
included in the EPROM, to be used for the messages on
the display.
ENABLING THE PROMOTIONAL MESSAGE
When in this menu, press the confirm button “ ” to display
the status of the message (enabled or disabled). The
status can then be changed using the “ ” and “ ” buttons.
SETTING THE PROMOTIONAL MESSAGE
The 4-line message can be written using the “ ” and “ ”
buttons to scroll through the available characters.
Press the confirm button “ ”, the first character will start
blinking and can be modified.
The message is stored by pressing button “ ”.
PRE-SELECTIONS
According to the settings defined via software, the “-” and
“+” buttons can be used to vary the amount of sugar or,
alternatively of coffee or water.
There is also the option of using some selection buttons to
have dispensing:
- without cup;
- with extra sugar, i.e. a greater amount of sugar (program-
mable) on all selections where it is dispensed;
- with sugar, added to unsweetened selections;
- with extra milk, i.e. a greater amount of milk (programma-
ble) on all selections where it is dispensed.
The LEDs will indicate the average dose change.
It is possible to decide the variation of product dose and
variation of selections price for the defined pre-selection.
MISCELLANEOUS
JUG FACILITIES
Some models, supplied with a special button, permit
dispensing of a number of selections (programmable
between 1 to 9; 5 as default) without cup to fill a jug.
PASSWORD
It is a 5-digit numeric code which is required to access
programming.
The default value of this code is set to 00000.
ENABLING THE PASSWORD
This function is used to enable the option of requesting the
password to access programming; the password request
is disabled by default.
FILLER MENU MASKING
This function is used to determine the filler menu options
to be left active or to be disabled.
The reference numbers of the menus do not change even
if some are disabled.
ENERGY SAVING
In order to save electric power when the machine is not in
use, this function is used to switch off boiler heating and/
or external lighting.
2 switch-off time bands can be programmed on a weekly
basis; the week days are identified by a progressive
number (1=Monday, 2=Tuesday etc.).
The same time band cannot include days from different
weeks.
If time bands are set overlapping, the machine will remain
switched on for the shorter period.