Necta Brio Espresso, Installation, Use And Maintenance Manual

Page: 8 / 40

4
© by NECTA VENDING SOLUTIONS SpA 0101 Brio C-I
Weight
- Espresso 55 Kg
- Instant 55 Kg
CUP DISPENSER
Suitable for cups with a rim diameter of 73-74 mm. with a
capacity of approximately 190 cups;
COIN MECHANISM
The machine can be supplied with provisions for the
installation of Executive payment systems.
SALES PRICES
A different programmable price can be set for each selec-
tion;
the standard setting has the same price for all selections.
JUG FACILITIES AND FREE VEND
Using a special key, up to 5 selections of fresh brew can
be dispensed without cup to fill a jug, or to get free
dispensing of normal selections.
COIN BOX
Made of plastic with lock as optional accessory.
WATER SUPPLY
From the mains, with a water pressure of 5 to 85 N/cm 2 .
AVAILABLE ADJUSTMENTS
Espresso models: coffee dose, grinding, instant product
and water doses by volume.
Instant models: time adjustment for instant product
and water doses.
Temperature control
Factory set on the correct operating temperature. A trim-
mer located on the control board allows small adjustments
(as necessary).
CONTROLS
- Presence of cups
- Presence of water
- Presence of coffee
- Presence of coffee unit
- Liquid waste container full (optional for models with
water supply tank)
- Operating temperature reached
SAFETY DEVICES
- Door switch
- Presence of liquid waste container
- Manual-reset boiler safety thermostat
- Air-break float
- Overflow solenoid valve (only with water supply from
the mains)
- Liquid waste container float
- Instant boiler anti-boiling thermostat (instant models)
- Time protection for:
Pump
Coffee unit ratiomotor
Coffee grinder
- Overheating protection for:
Doser units
Coffee unit ratiomotor
Magnets
Pump
Electric mixers
Coffee grinder motor
- Fuse protection for:
Electronic card power supply transformer
Executive power supply transformer
CAPACITY OF CONTAINERS
Coffee beans 1.8 Kg
Sugar 1.9 Kg
Powdered milk 0.8 Kg
Instant coffee 0.7 Kg
Tea 2.0 Kg
Chocolate 1.5 Kg
Stirrers (N.) 245
POWER CONSUMPTION
The machine power consumption depends on many fac-
tors, such as the temperature and ventilation of the room
where it is installed, the inlet water and boiler temperature,
etc.
Under average conditions, and namely:
- ambient temperature: 22° C
- boiler temperature: 93° C
- inlet water temperature: 18° C
- average water dose per selection: 93 cc
the following power consumption resulted:
- to reach operating temperature 53 Wh
- for each hour of stand-by 110 Wh
- for each selection (average) 7.65 Wh
The above power consumption calculated from average
data should only be taken as an indication.
ACCESSORIES
A wide range of accessories can be installed on the
machine to change its performance:
The assembly kits are supplied with their own installation
and test instructions, which must be strictly observed to
ensure the machine's safety.
Installation and the following testing operations, must
be carried out only by qualified personnel who have
the specific knowledge of the machine functioning
from a point of view of both electrical safety and health
regulations.