15
© by NECTA VENDING SOLUTIONS SpA
0101 Brio C-I
PROGRAMMING
Pressing the programming button located on the push-
button card internal side twice (see Fig. 21), sets the
machine to "Programming" mode.
The message "Programming" is displayed for approx. 2
seconds, and after this the first option of the programming
menu appears on the display enabling the following func-
tions:
"Present failures"
reading of present failures
"Water dose"
water dose setting
"Powd. dose"
powder dose setting
"Set Prices"
price setting
Set Prices/Select"
price/selection setting
enable/disable selections
"Basic unit / DP"
basic coin value setting
and decimal point position
"Validator lines"
validator line value setting
"Initialising"
RAM initialising
"Machine code"
machine identification code
setting
"Machine Config."
setting the machine version
(mains/tank)
"Selec. counter"
setting the number of selections
after which the machine will lock.
The following functions are also available:
- failure reset;
- machine installation;
- statistics display;
- statistics printout
- statistics reset.
When the display shows "Washing" the buttons are as-
signed the following functions:
previous function
next function
mixer cleaning
unit rotation / coffee release
dispensing sugar
dispensing extra sugar
not used
not used
not used
not used
Button "2" is used to operate the coffee unit if this is
connected to the electrical system, and it releases a coffee
dose if the unit is disconnected.
Summary of Contents for Brio Espresso
