Necta Vending Solutions SpA Zeta CB Series, Installation - Use - Maintenance

Page: 24 / 40

© by NECTA VENDING SOLUTIONS SpA 60
01 10 126-03
READING THE STORED DATA
Place minidip 2 into position "ON".
3 selection buttons are used, and given the following
functions:
BUTTON 1 Data input/output
BUTTON 2 Data sequence
BUTTON 5 Data reset
When pressing button 1, the number of sales in the first
selection is displayed and button 1 is illuminated.
To read the number of sales related to the other selections,
press button 2 each time, the illuminated button indicates
the selection to which the value on the display is referred.
To reset a value press button 5, the display will be reset and
the next data unit will automatically be displayed.
Warning: The values relating to global data, sales and
cash cannot be reset with button 5 (see relevant sec-
tion).
The maximum value which can be stored is 50,000, beyond
which counting starts again from 0.
SELECTION BUTTONS
Data sequence
Reset
Data access
Cash for each selection
Total number for each selection
Total cashed
(for each selection)
Failures for motor stops
x No. of selections
Serial line failures