290 – Chapter 1
DRAFT 3
ACR Max Digit Assignment, 1-14-07
December 2004
NEC Business Solutions Ltd
Doc.
No.: 8194 -
Release 2.0
Dece
mber 2004
1-14-07
System Mode
1
Submode
14
Data No.
07
PC Programming
+ AM
ACR Max Digit Assignment
General Description
Use this Memory Block to specify the number of digits to be collected by the system before
the message is sent to the network
.
System Software R2000 or higher is required.
Display
Programming Procedures
1
Go off-line.
2
Press LK1 + LK14 +
KG
to access the Memory Block.
3
Use dial pad keys to enter Setting Data
.
Note
:
Use the following to enter data:
J
to move cursor left.
L
to move cursor right.
K
~
I
to enter data
Default Values
Length = 24 Digits
Valid range for setting data: 01~99
4
Press
N
to write the data.
5
Press
P
to go back on-line.
Related Programming
M.B. Number
Memory Block Name
3-03
Trunk-to-Trunk Group Assignment
4-40
LCR Class Selection
1-1-30
Route Advance Block Assignment
1-8-08
Class of Service (Station) Feature Selection 2
1-14-00
ACR Allow/Deny Selection
1-14-01
ACR Dialling Assignment
1-14-02
ACR Dial Allow/Deny Selection
1-14-03
ACR Route Table Number Assignment
1-14-04
ACR Trunk Group to Route Number Assignment
1-14-05
ACR Digit Delete Assignment
1-14-06
ACR Digit Add Assignment
N
1.
When 00 is set for this Memory Block, refer to Memory Block 1-1-81 (ISDN / K-CCIS Interval Time
Selection) for the time it takes before the message is sent to the K-CCIS Network
.
2.
ARS Max Digit Assignment applies to K-CCIS Trunk Routes routed through Automatic Route Selection
.
0 7 : M A X D G T
0 1 =
2 4
T I M E
D I S P L A Y
Data
No.
Title
Setting
Data
Route
01~32
