3-2 Troubleshooting
Table 3-1 Troubleshooting
Problem
What To Do
The system does not
power on.
If you are operating the system with battery power, check that the
battery pack is correctly inserted. Attach the AC adapter to recharge
the battery.
If you have the AC adapter attached, check that the electrical outlet
you are using works.
LCD screen is dark
and blank.
Power-saving mode has shut off the backlight. Press a keyboard key
or the Suspend button.
The built-in LCD may not be selected. Press Fn F3 once or twice.
Screen brightness needs adjustment. Adjust the control.
The system entered Suspend mode due to low battery power. (Check
the Status bar for a half-moon icon.) Plug in the AC adapter or
replace the battery pack, and then press the Suspend button to
resume operation.
Battery power does
not last long.
Use power-saving modes.
Fully charge and discharge the battery several times to recondition it.
Replace the battery.
Information on the
LCD screen is
difficult to see.
Adjust the brightness control.
An optional
component does not
work.
Make sure the component is securely installed or connected. Verify
that the system parameter for the I/O port configuration is set
correctly in Setup.
The
Suspend/Resume
button does not
work.
A disk drive might be busy. Wait until the disk drive stops and try
again.
If system does not resume, it may have auto suspended on a low
battery. Attach the AC Adapter and try again.
If the system does not resume, check that Auto Play is disabled. See
“Changing the Auto Play Setting” in Chapter 4 for details.
The NEC Versa may be connected to a docking station. Some power
management functions do not work when the NEC Versa is docked.
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!
