Setup and Operation 2-19
6.
Carefully turn over the keyboard and place it face down on the VersaGlide. Be
careful not to twist or disconnect the keyboard cable.
7.
Locate the dip switch block. Using a fine tipped object, change the Dip Switch 1
setting to Off. (For other functions, set the appropriate switch to the required set-
ting. See “Setting Switches” for switch functions and settings.)
!
CAUTION
Never use a lead pencil, ball point pen or ink pen
to change switch settings.
Figure 2-17 Dip Switches
NOTE
The system memory expansion slots are
also located underneath the keyboard. Therefore,
if you need to install DIMM modules, you might
want to do so while the system is already
disassembled.
8.
Reassemble the system as follows:
Lift up the keyboard and align the tabs on the front of it with the grooves in
the system.
Reseat the keyboard in its original position.
SOLD BY laptopia2005 DO NOT RESELL!!
SOLD BY laptopia2005 DO NOT RESELL!!
