NEC Univerge SV9100, Manual

Page: 756 / 766

Issue 2.0
SV9100 Networking Manual 13-161
26 TX (Transmit) Gain
Define the setting to amplify and to
attenuate the size of the
transmission voice. The gain given
when the voice packet is sent from
the VOIPDB is set.
0-40 (-20 ~ +20)
0 = -20 dbm
1 = -19 dbm
:
20 = 0 dbm
:
39 = 19 dbm
40 = 20 dbm 20 (0 dbm)
27
RX (Receive) Gain
Define the setting to amplify and to
attenuate the size of the received
voice. The gain given when the
voice packet is received from the
VOIPDB is set.
0-40 (-20~+20)
0 = -20 dbm
1 = -19 dbm
:
20 = 0 dbm
:
39 = 19 dbm
40 = 20 dbm
20 (0 dbm)
28 Priority Codec Setting
The option selected here
determines what other codec
options are applied by priority.
0 =G711 PT
1 =G723 PT
2 =G729 PT
3 =G.722 PT 0
30 EchoAuto Gain Control
Define the Auto Gain Control.
0 - 5 0
31
DTMF Relay Mode
The initial setup information for the
VOIPU is set in Program 84-27-02.
If this option is set to either 0 or 1,
priority is given.
0 =Disable
1 =RFC2833
2 =VoIPU 2
32
FAX Relay Mode
Select "2" for FAX Relay to SLT
(Program 15-03-03:special), Trunk
and NetLink.
Refer to Program 84-01-36 through
84-01-58 for FAX Relay options.
0 =Disable
1 =Enable
2 =Each Port Mode 0
33 G.722 Audio Frame
Maximum number of G.722 Audio
Frames. G.722 assumes the audio
signal made by a specimen by
16kHz and the frame of 10ms is
assumed to be a unit to 64kbps by
the encoding compressed method.
1 =10 ms
2 =20 ms
3 =30 ms
4 =40 ms 3
Input Data
Ite
m
No.
Item Input Data Default