NEC Univerge SV9100, Manual

Page: 180 / 766

Issue 2.0
SV9100 Networking Manual 4-101
S
ERVICE
C
ONDITIONS
General:

The Quick Transfer to Voice Mail feature is allowed when:

Listening to the ring back tone (RBT)

Listening to the call waiting tone (CWT)

In Handsfree Answerback Mode

In Voice Over Mode

This feature is allowed from a single line telephone (SLT) until the PBR times
out (default: 10 sec).

An SLT may perform the Quick Transfer only during screened transfer
operations.

The InMail is supported for centralized voice mail in a CCIS network.
R
ELATED
F
EATURE
L
IST

Digital Voice Mail
G
UIDE TO
F
EATURE
P
ROGRAMMING
This guide provides a list of associated Programs that support this feature.
Program/
Item No.
Description/Selection Assigned Data Comments
11-16-09 Single Digit Service Code
Setup – Access to Voice
Mail
Default is 8
Assign access code for Quick Transfer to Voice
Mail.
11-07-01 Department Group Pilot
Numbers Tel Groups 1~64
Dial up to eight digits.
Default is No Setting Assign pilot number to each Department Group set
up in PRG 16-02. Extension numbers are assigned
in PRGs 11-02, 11-04, 11-06, and 11-08.
15-03-01 Single Line Telephone
Basic Data Setup – SLT
Signaling Type 0 = DP
1 = DTMF
Default is 1 Tell the system which dialing is used by the
connected telephone users. For each Voice Mail
extension this option must be 0.
15-03-03 Single Line Telephone
Basic Data Setup –
Terminal Type 0 = Normal
1 = Special
Default is 0 Enter 1 to allow a single line port to receive DTMF
tones after the initial call setup.
45-01-01 Voice Mail Integration
Options – Voice Mail
Department Group Number 0 = No Voice Mail
0~64 Groups
Default is 0
Assign Department Group Number as the Voice
Mail Group.