![background image](http://html.mh-extra.com/html/nec/tm1200/tm1200_user-manual_251414070.webp)
3-34 Configuring Your System
Power LED
The Power LED is lit while the system power is on. Connect the Power LED from the system case
to this pin. There are two types of LED that you can use: 3-pin single color LED or 2-pin dual
color LED(ACPI request).
a. 3 pin single color LED connect to pin 4, 5, & 6. This LED will lit when the system is
on.
b. 2 pin dual color LED connect to pin 5 & 6.
GREEN Color: Indicate the system is in full on mode.
ORANGE Color: Indicate the system is in suspend mode.
Speaker
Speaker from the system case is connected to this pin.
If on-board Buzzer is available:
Short pin 14-15: On-board Buzzer Enabled.
Open pin 14-15: On-board Buzzer Disabled.
HDD LED
HDD LED shows the activity of a hard disk drive. Avoid turning the power off while the HDD led
is lit. You can connect the HDD LED from the system case to this pin.
Summary of Contents for TM1200
