3-16 Configuring Your System
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second serial ports. The settings are:
3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and
EPP features. It has the following options:
Disable
3BCH/IRQ7 Line Printer port 0
278H/IRQ5 Line Printer port 2
378H/IRQ7 Line Printer port 1
Onboard Parallel Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate the
onboard parallel port in the ECP and SPP modes simultaneously, choose “ECP/SPP.” By choosing
“ECP”, the onboard parallel port will operate in ECP mode only. Choosing “ECP/EPP” will allow
the onboard parallel port to support both the ECP and EPP modes simultaneously. The ECP mode
has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After
selecting it, the following message will appear: “ECP Mode Use DMA” At this time the user can
choose between DMA channels 3 or 1. The onboard parallel port is EPP Spec. compliant, so after
the user chooses the onboard parallel port with the EPP function, the following message will be
displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9 spec. can
be chosen.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use during ECP mode. The settings are 3 or 1. The
default setting is 3.
Parallel Port EEP Type
Select EPP port type 1.7 or 1.9.
Summary of Contents for TM1200
