manualshive.com logo in svg

NEC TM1200, User Manual

Share
Download
NEC TM1200 User Manual Download Page 3

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the valuable
property of NEC Computers International and/or its licensors. NEC Computers International and/or its
licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document,
including all design, manufacturing, reproduction, use, and sales rights thereto, except to the extent said
rights are expressly granted to others.

NEC Computers International product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual performance of each such
product is dependent upon factors such as system configuration, customer data, and operator control. Since
implementation by customers of each product may vary, the suitability of specific product configurations
and applications must be determined by the customer and is not warranted by NEC Computers International.

To allow for design and specification improvements, the information in this document is subject to change
at any time, without notice. Reproduction of this document or portions thereof without prior written
approval of NEC Computers International is prohibited.

Trademarks

INTEL is a registered trademark of Intel Corporation.

MS-DOS is a registered trademark of Microsoft Corporation.

Pentium is a registered trademark of Intel Corporation.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective
trademark owners.

Copyright 2000

NEC Computers International B.V.

Nieuweweg 279

6603 BN Wijchen

The Netherlands

All Rights Reserved

Summary of Contents for TM1200







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands