NEC TM1200, User Manual

Page: 57 / 134

Configuring Your System 3-21
VGA
When Enabled, you can set the VGA to awaken the system.
LPT & COM
When LPT & COM is On, any activity from one of the listed system peripheral devices or IRQs
wakes up the system.
HDD & FDD
When HDD & FDD is On, any activity from one of the listed system peripheral devices or IRQs
wakes up the system.
PCI Master
When PCI Master is On, any activity from one of the listed system peripheral devices or IRQs
wakes up the system.
Power On by PCI Card
This item allows the user to Enabled/Disabled the Power On by PCI card.
Wake Up On LAN/Ring
To use this function, you need a LAN add-on card or Modem which supports power on functions.
During Disabled, the system cannot be boot up through LAN and ignores any incoming call from
the modem. During Enabled, the system can be boot up through LAN and modem.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm You can choose which month the system will boot up. Set to
0, to boot every day.
Time(hh:mm:ss) Alarm You can choose what hour, minute and second the system will
boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the operating
system, before this function will work.