NEC SuperScript 1800, Network User'S Manual

Page: 55 / 82

Network Interface Window 49
NETWORK PRINTER MANAGER
N
ETWORK
I
NTERFACE
W
INDOW
TCP/IP Tab NetWare Tab
Item Description
TCP/IP Enabled Use this check box to turn on the TCP/IP
protocol stack.
IP Address
Assignment
Method Use this drop-down list for selecting how
an address will be assigned to the printer.
Select Static if you want to manually enter
a permanent address. Select DHCP if you
want a DHCP server to assign an address;
however, if the printer is restarted, it may
be assigned a different address. Select
BOOTP or RARP if you want the NIC to
broadcast a request for an address from a
BOOTP or RARP server. The printer must
be restarted if BOOTP or RARP is
selected.
TCP/IP Parameters Use these text boxes to enter a static IP
address. Enter a default gateway (router)
address if users from a different TCP/IP
network want to use the printer.
Item Description
NetWare Enabled Use this check box to turn on the IPX
protocol stack.
Check Job Every Use this spinner for selecting how much
time will pass until the NPM verifies the
network settings for a selected file server.
Check Configuration
Every Use this spinner for selecting how much
time will pass until the NPM verifies the
network settings for a print queue.
IPX Frame Type Use these options to select the type of
Ethernet framing used by your IPX
network.
Serviced Queues This list displays all the print queues
attached to specific printers.
Add Q Click to add a print new print queue.
Remove Q Click to remove a selected queue.
Modify Mode Click here to switch between NetWare
Bindery and NetWare NDS modes.