NEC SuperScript 150C, User Manual

Page: 65 / 102

Programmable Printer Features
This appendix contains a brief descripton of the printer
settings, using the printer setup utility programme.
Factory Settings
When you receive the printer, its basic operating
parameters are already set with pre-defined factory settings
(default settings for PCL III+ emulation). These are the
settings which appear in the print test the very first time you
run it (see specific section in
Troubleshooting).
Your printer emulation is set to be compatible with the
diskette included with your printer. You should not have
to vary anything.
The factory settings for the printer parameters are:
Feature Default setting
Paper format Letter
Paper device ASF
Perforation skip mode ON
Text scale mode OFF
Graphic resolution 300 dpi
Line terminator Normal (CR=CR, LF=LF, FF=FF)
Print quality LQ (Letter Quality)
Width type Normal
Orientation Portrait
Type style (Font) Courier Upright Portrait 10 cpi 12 pt
Character set CP 437 International
Programmable Printer Features B-1