NEC SIGMABLADE N8406-017, Manual

Page: 81 / 95

72
Commands
Commands
The following table shows CLI commands supported by the SIGMABLADE-H EM firmware.
Indications in the Access right column
A: operation by Administrator is possible.
O: operation by Operator is possible.
U: operation by User is possible.
Indications in EM card active/standby column
A: settings can be configured from the active EM
S: settings can be configured from the standby EM
Indications in backup target column
Y: configuration information that can be backed up
N
: configuration information that cannot be backed up
CLI commands of the SIGMABLADE-H EM firmware
Command Access
right
Description Default value EM card
active/standby
Backup
target
Remarks
Switch module management command
POWEROFF
SWITCH A/O Shuts down the DC power of the
specified switch module. N/A A N
POWERON
SWITCH A/O Powers on the DC of the
specified switch module. N/A A N
RESTART
SWITCH A/O Restarts the specified switch
module. N/A A N
SET SWITCH
NAME A/O Names the specified switch
module.
(depends on
the switch
module)
A N
SET SWITCH
UID A/O/U
Lights on and off the ID
LED
of
the specified switch module
N/A A N
SHOW SWITCH
INFO A/O/U Displays the information on the
specified switch module.
Information to be displayed:
Switch module type
Manufacturer‟s name
Product name
Product part number
Product version
Product serial number N/A A N
SHOW SWITCH
LIST A/O/U Lists installed switch modules. N/A A N
SHOW SWITCH
PORT MAP A/O/U Displays the port mapping
information for the specified
switch module. N/A A N
SHOW SWITCH
STATUS A/O/U Displays the statuses of the
specified switch module
Information to be displayed:
ID
LED
status
Operational status
N/A A N
* “Information to be displayed” indicates key information to be displayed.