NEC SIGMABLADE N8406-017, Manual

Page: 53 / 95

53
FCC COMPLIANCE
EC and C-Tick STATEMENTS
Trademarks
NEC ESMPRO and NEC DianaScope are trademarks of NEC Corporation.
All other product and company names used in this publication are the trademarks or registered trademarks of their respective
trademark owners.
Names used with sample applications are all fictitious. They are unrelated to any existing product names, names of organizations,
or individual names.
Notes
.
(1)
No part of this manual may be reproduced in any form without prior written permission of NEC Corporation
(2) The contents of this manual are subject to change without prior notice.
(3) The contents of this manual shall not be copied or altered without prior written permission of NEC Corporation
(4) All efforts have been made to ensure the accuracy of all information in this manual. If you find any part unclear,
incorrect, or omitted in this manual, contact the sales representative where you purchased this product.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or consequential
This product has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interface when the device is operated in a commercial environment. This device
generates, uses and can radiated radio frequency energy and if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this device in a residential area is likely to cause harmful interface in which case the user will be
required to correct the interference at his own expense.
Warning
This is Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.