NEC SIGMABLADE N8406-017, Manual

Page: 59 / 95

59
Installation, relocation and storage
Do not install the product in a place other than specified.
Do not install the product in a place other than specified in this guide. Avoid the
following locations. There is a risk of fire.
● dusty place
● a humid place located near a boiler, etc.
● a place exposed to direct sunlight
● an unstable place
Do not use or store this product in a corrosive environment.
Avoid the usage or storage of this product in an environment which may be exposed
to corrosive gases, such as those including but not limited to: sulfur dioxide,
hydrogen sulfide, nitrogen dioxide, chlorine, ammonia and/or ozone. Avoid
installing this product in a dusty environment or one that may be exposed to
corrosive materials such as sodium chloride and/or sulfur.
Avoid installing this product in an environment that may have excessive metal flakes
or conductive particles in the air.
Such environments may cause corrosion or short circuits within this product,
resulting in not only damage to this product, but also posing a fire hazard.
If there are any concerns regarding the environment at the planned site of installation
or storage, please contact your sales representative.
Do not cover ventilation openings.
Do not cover the ventilation openings of the Blade Enclosure. If they are covered,
the temperature inside the products in the Blade Enclosure may rise, which may
result in a fire.
Failure action
Failure action
When the product fails, shut off the breaker of the power distribution board, unplug
the product and contact your sales maintenance personnel.
Disposal
Product disposal, collection, and recycling
Contact NEC sales representative before disposal, collection, or recycling of the
product.
CAUTION
WARNING
WARNING