3-1
3. Names and Roles of Sections
This chapter describes the names and functions of the sections in the disk array unit.
3.1
Front View
A front mask is installed on the front face of the disk array unit as shown in the figure above.
The front mask can be removed by releasing the lock with the accessory key and pulling out toward
you with your hands hooked on the both sides of the mask.
Removing the front mask, you can view the disk drives shown in the figure below.
(5) SHUTDOWN switch
(1) POWER LED
(2) SERVICE LED
(3) SHUTDOWN switch
(7) Ejector
(1) POWER LED
(2) SERVICE LED
(6) Hard disk FAULT LED (5) Hard disk READY LED
(4) Disk drive/dummy tray
