Installation Guide
QX-S5500G Series Ethernet Switches
1-4
"
Installing/removing a power module
."
The QX-S5524GT-4X1C switch comes with the two fan tray slots empty. You must install
two fan trays of the same model for the switch. In this figure, two LSPM5FANSA fan trays
are installed in the fan tray slots. For more information about installing and removing a fan
tray, see "
Installing/removing a fan tray.
"
The QX-S5524GT-4X1C switch comes with a filler panel in the interface card slot. You can
select an interface card for the switch as required. In this figure, an LSWM5QP2P interface
card is installed in the interface card slot. For more information about installing and
removing an interface card, see "
Installing/removing an interface card
."
1.4 QX-S5548GT-4X1C panel views
Figure 1-7
QX-S5548GT-4X1C front panel
(1) 10/100/1000 BASE-T autosensing Ethernet port
(2) 10/100/1000 BASE-T autosensing Ethernet port LED
(3) Management Ethernet port
(4) Console port
(5) USB mini Console port
(6) Port LED mode switching button
(7) USB port
(8) System status LED (SYS)
(9) SFP+ port
(10) Port mode LED
(11) Interface card status LED (SLOT)
(12) Power module 2 status LED (PWR2)
(13) Power module 1 status LED (PWR1)
(14) SFP+ port LED
(15) Management Ethernet port LED