Installation Guide
QX-S5500G Series Ethernet Switches
6-33
2. Set FTP protocol parameters
3. Set XMODEM protocol parameters
0. Return to boot menu
Enter your choice(0-3):
3) Enter
3
to set the XMODEM download baud rate.
Please select your download baudrate:
1.* 9600
2. 19200
3. 38400
4. 57600
5. 115200
0. Return to boot menu
Enter your choice(0-5):5
4) Select an appropriate download rate, for example, enter
5
to select 115200 bps.
Download baudrate is 115200 bps
Please change the terminal's baudrate to 115200 bps and select XMODEM protocol
Press enter key when ready
5) Set the serial port on the terminal to use the same baud rate and protocol as the
console port. If you select 9600 bps as the download rate for the console port, skip this
task.
a) Select
Call
>
Disconnect
in the HyperTerminal window to disconnect the terminal
from the switch.
Figure 6-9
Disconnecting the terminal from the switch
b) Select
File
>
Properties
, and in the
Properties
dialog box, click
Configure
.
