Installation Guide
QX-S5500G Series Ethernet Switches
6-32
NOTE:
To use the default setting for a field, press
Enter
without entering any value.
If the switch and the server are on different subnets, you must specify a gateway address for the switch.
4) Enter all required parameters and press
Enter
to start downloading the file.
Loading.................................................Done!
5) Enter
Y
at the prompt to upgrade the basic Boot ROM section.
Will you Update Basic BootRom? (Y/N):Y
Updating Basic BootRom...........Done.
6) Enter
Y
at the prompt to upgrade the extended Boot ROM section.
Updating extended BootRom? (Y/N):Y
Updating extended BootRom.........Done.
7) Enter
0
in the Boot ROM update menu to return to the Boot menu.
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
8) Enter
0
in the Boot menu to reboot the switch with the new Boot ROM image.
III.
Using XMODEM to upgrade Boot ROM through the console port
XMODEM download through the console port is slower than TFTP or FTP download
through the Ethernet port. To save time, use the Ethernet port as long as possible.
1) Enter
6
in the Boot menu to access the Boot ROM update menu.
1. Update full BootRom
2. Update extended BootRom
3. Update basic BootRom
0. Return to boot menu
Enter your choice(0-3):
2) Enter
1
in the Boot ROM update menu to upgrade the full Boot ROM.
The file transfer protocol submenu appears:
1. Set TFTP protocol parameters
