13
※PCI-Express x16 スロットの近くにメモリスロットがある場合は、メモリロックレバーがきちんと
起きていることを確認して接続してください。
※PCI-Express x16 スロットにロックレバーがある場合、接続時にロックレバーが破損する恐れがあ
りますので、ロック部分に十分注意しながら装着してください。
(5)
カードの接続が終わりましたら、ボードがしっかりささっていることを確認してから、取り外し
たねじもしくは固定治具で Quadro K2200 を固定して下さい。
このとき、背面から見て Display-Port コネクタと DVI-I コネクタがきれいに見えていることを確
認してください。
注意
無理な力を加えない
うまくカードが取り付けられない時は、カードを一度取り外してから再度取り付け直してく
ださい。カードに過度の力を加えると破損するおそれがあります。
また実装時にカード上の部品(ヒートシンクやコンデンサ等)に力が加わらないようにして
ください。
メモリロックレバー
PCI-Express x16 スロットロックレバー
DVI-I コネクタ
Display-Port コネクタ