3-20 Disassembly and Reassembly
Removing the Hard Drive
A – Screws
B – Top Bracket
3 1/2-Inch Diskette Drive Removal
Remove the 3 1/2-inch diskette drive as follows.
1.
Remove the left side cover and the front panel (see “Removing the Left Side
Cover” and “Front Panel Removal” earlier in this section).
2.
Label and unplug the signal and power cables from the back of the diskette
drive.
Note
:
When reinstalling the diskette drive, note that all
power cables are keyed to fit only in the correct position.
3.
Remove the two screws holding the diskette drive to the diskette drive
bracket.
4.
Slide the diskette drive out of the chassis.
Summary of Contents for PowerMate VT 300i Series
