Desktop Repair 5-3
2.
Loosen the two captive thumb screws shown in Figure 5-1.
Figure 5-1 System Unit Cover Screws
3.
Slide the system unit cover toward the front about one inch.
4.
Lift the system unit cover up and off (see Figure 5-2).
Figure 5-2 Removing the System Unit Cover
Expansion Board Removal
Remove any installed expansion board(s) using Figure 5-3 and Figure 5-4 and the following
steps.
1.
Remove the system unit cover as previously described.
2.
Disconnect any cables leading from the expansion board(s).
3.
Remove the screw from the expansion slot bracket (see Figure 5-3).
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...