3-34 Option Installation
Figure 3-35 Aligning the Front Panel
3.
Replace the system unit cover.
4.
Run the Setup program to set the new configuration.
Replacing the Desktop 3 1/2-Inch Drive Bracket
When replacing the 3 1/2-inch drive bracket, take care to prevent pulling and loosening the
cable connections.
1.
Place the 3 1/2-inch drive bracket in the 3 1/2-inch device slot.
2.
Slide the 3 1/2-inch drive bracket toward the front of the chassis so that the tabs
secure the bracket.
3.
Use the previously removed bracket screw to secure the bracket in place.
Figure 3-36 Securing the 3 1/2-Inch Drive Bracket
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...
