Setup and Operation 2-21
Serial Port (1 and 2) Address
The serial ports 1 and 2 may be “Auto Configured” detected or “Disabled.” The default is
“Auto Configured.” When “Auto Configured” is selected, the first free Serial port is
assigned regardless of what is selected.
The serial COM port and addresses are as follows. When an option is selected for one serial
port, the selection is not available for the second port.
Disabled
COM1, 3F8h, IRQ4
COM2, 2F8h, IRQ3
COM3, 3E8h, IRQ4
COM4, 2E8h, IRQ3
Serial Port 2 IR Mode
The Serial Port 2 IR Mode field allows you to dedicate Serial Port 2 for Infra-red
applications. This field can be either “Enabled” or “Disabled.” The default is “Enabled.”
Parallel Port Interface
The parallel ports may be “Auto” detected or “Disabled.” The default is “Auto.” When
“Auto” is selected, the first free LPT port is assigned regardless of what is selected. The
parallel port address options are as follows.
Disabled
LPT3, 3BCh, IRQ7
LPT1, 378h, IRQ7
LPT2, 278h, IRQ7
LPT3, 3BCh, IRQ5
LPT1, 378h, IRQ5
LPT 2, 278h, IRQ5
Auto
Parallel Port Type
The Parallel Port Type field options are as follows.
Compatible
−
sets the parallel port to the standard AT compatibility.
Bi-directional (default)
−
sets the parallel port to input/output mode only.
Summary of Contents for POWERMATE P2166
Page 217: ...Index 4 ...