NEC POWERMATE P2166, Service Manual

Page: 80 / 219

2-36 Setup and Operation
Checking Selected Files
To continue the restoration process, check the files to be restored as follows.
1. Look at the list of files in the “Check list of files to be restored” area of the
screen.
2.
If you need to add any files to the list, go back to the preceding section and repeat
those steps.
3. If you need to remove any files from the list, do so as follows.
„
To remove any selected files, highlight the file name and click “Delete item in
list.” This method lets you remove one item at a time.
„
To remove the entire list, click “Clear list.”
Once the list is set, continue to the next section.
Restoring the Files
Complete the restoration process as follows.
1.
In the “Restore the files from the CD” area of the screen, locate the two options:
„
Restore the files listed — this option lets you proceed with the restoration and
continue to the next step. Go to the next step to complete the restoration.
„
Cancel — click this option to cancel the restoration. This returns you to the
NEC System Restore menu.
2.
To proceed with the restoration, click “Restore the files listed.” When the
restoration is completed, a file restore message appears.
3. Click
OK.
4. If you replaced any Windows system files, exit Windows and restart the system.
Recovering the System
If the preinstalled software becomes unusable or you can’t reboot from the hard disk, you
can restore your system to its original shipping configuration.